You can purchase Asbestos Reinforced Sheet Coated With Graphite in 1.0mm to 5.0mm thickness. You should choose the thinnest material for your application.
The general properties of Asbestos Reinforced Sheet Coated With Graphite are made from a combination of asbestos sheet with graphite and tinplate after dash. It is generally used in high temperature and high pressure environment, usually used in internal combustion engine, vacuum pump, air pump cylinder head gasket.
If you cannot find the material you are looking for, or need a custom made material, please contact us.
Is Asbestos Reinforced Sheet Coated With Graphite the best material for my application? If you are not sure which material is best for your application, then you can consult us.
In addition, we are also happy to provide technical assistance and advice, so please do not hesitate to contact us if you need assistance.
Product specification
• Supplier = Fangwo seal
• Available thickness = 1.0mm- 3mm;3.0mm-6.0mm
• Sheet Size = 500*500mm,500*1000mm,1000*1000mm,1000*1500mm,Etc
project | unit | Parameter values |
Tensile strength | MPa | ≥2.5 |
Ignition loss | % | ≤24±7 |
Compression ratio | % | 40 |
Resilient rate | % | ≥20 |
Stress relaxation force | % | ≤35 |
Density | g/m³ | 1.0～1.2 |
Water content | % | 2.0 |
At room temperature 150±2°C, keep in aviation oil for 5h | Oil absorption，% | ≤50 |
Thickening of oiled，% | ≤6 | |
Temperature 15 ~ 30°C, in aviation coal (no. 1 or 2) or 75 aviation gasoline for 5 hours removed | Oil absorption，% | ≤50 |
Thickening of oiled，% | ≤8 | |
Take it out in distilled water for 5h at 15-30 °C | water absorption，% | ≤60 |
Immersion thickening，% | ≤6 |
Thickness and the same sheet deviation requirements
厚度 （mm） | 允许偏差 （±mm） | 同张允许偏差 （相距300 mm任意两点） |
0.4～1.0 | 0.05 | 0.05 |
1.1～2.5 | 0.06 | 0.06 |
Max product specification | 1500mm*1100mm | |
|
Widely used in petroleum, chemical, electric power, gas, nuclear energy, aerospace, textile, metallurgy, ships, machinery and other industrial equipment used in the flange, valve, reactor, pump, pressure vessel, heat exchanger, condenser, generator, air compressor, exhaust pipe, refrigerator and other sealing.
Customer service
We are happy to answer any questions you may have about this product. Please contact us for more information.
