Reinforced Asbestos Sheet

You can purchase Reinforced Asbestos Sheet in 1.0mm to 5.0mm thickness. You should choose the thinnest material for your application.

The general properties of Reinforced Asbestos Sheet  are made from a combination of asbestos sheet and tinplate after dash. It is generally used in high temperature and high pressure environment, usually used in internal combustion engine, vacuum pump, air pump cylinder head gasket.

If you cannot find the material you are looking for, or need a custom made material, please contact us.

Is Reinforced Asbestos Sheet the best material for my application? If you are not sure which material is best for your application, then you can consult us.

In addition, we are also happy to provide technical assistance and advice, so please do not hesitate to contact us if you need assistance.


Product specification


• Supplier = Fangwo seal


• Available thickness = 1.0mm- 3mm;3.0mm-6.0mm

• Sheet Size  = 500*500mm,500*1000mm,1000*1000mm,1000*1500mm,Etc


Technical parameters



project

unit

Parameter values

Tensile strength

MPa

2.5

Ignition loss

%

≤24±7

 Compression ratio

%

40

Resilient rate

%

20

Stress relaxation force

%

35

Density

g/m³

1.0~1.2

Water content

%

2.0

At room temperature 150±2°C, keep in aviation oil for 5h

Oil absorption,%

≤50

Thickening of oiled,%

≤6

Temperature 15 ~ 30°C, in aviation coal (no. 1 or 2) or 75 aviation gasoline for 5 hours removed

Oil absorption,%

≤50

Thickening of oiled,%

≤8

Take it out in distilled water for 5h at 15-30 °C

water absorption,%

≤60

Immersion thickening,%

≤6


Thickness and the same sheet deviation requirements


厚度

mm

允许偏差

(±mm)

同张允许偏差

(相距300 mm任意两点)

0.4~1.0

0.05

0.05

1.1~2.5

0.06

0.06

Max product specification

1500mm*1100mm


Major product


 


Warning:  imagettftext(): Could not find/open font in /www/wwwroot/82.156.3.104/en/include/file.class.php on line 393

Warning:  imagettftext(): Could not find/open font in /www/wwwroot/82.156.3.104/en/include/file.class.php on line 394


Range of application



Widely used in petroleum, chemical, electric power, gas, nuclear energy, aerospace, textile, metallurgy, ships, machinery and other industrial equipment used in the flange, valve, reactor, pump, pressure vessel, heat exchanger, condenser, generator, air compressor, exhaust pipe, refrigerator and other sealing.


Customer service


We are happy to answer any questions you may have about this product. Please contact us for more information.